Port Scan List Management

You can manage scan lists based on the TCP protocol to check open ports and service information on endpoints.

Lists are created based on existing known ports, but if there are additional ports that need to be scanned depending on the customer's environment, you can create, delete, or activate/deactivate those items.

Checking Current Port Scan Targets

Port scans are updated when a node scan is executed.

  1. Go to Settings in the top menu.
  2. In the left Preferences menu, go to Node Management > Port Scan.

Creating a New Port Scan Item

You can create new ports as needed (if not already displayed).

  1. Go to Settings in the top menu.
  2. In the left Preferences menu, go to Node Management > Port Scan.
  3. Click Select Action > Create.
  4. For Protocol, keep the default as TCP.
  5. For Port, enter the port number.
  6. For Network Service, enter the network service name.
  7. For Application Mode, select Used (Selecting 'Not Used' will prevent scanning for this port).
  8. Click Create.

Deleting Unused Port Scan Items

  1. Go to Settings in the top menu.
  2. In the left Settings menu, go to Preferences > Node Management > Port Scan.
  3. Click the checkbox of the port to delete.
  4. Click Action Management > Delete.
  5. Click the Confirm button to proceed with port deletion.

Setting Port Scan Item to Active

Set the port to be turned on and actively scanned.

  1. Go to Settings in the top menu.
  2. In the left Settings menu, go to Preferences > Node Management > Port Scan.
  3. Click the checkbox of the port you want to use, or toggle Usage Status in the Status column.
  4. Click Action Management > Enable.

Setting Port Scan Item to Inactive

Set the port to be released and not scanned.

  1. Go to Settings in the top menu.
  2. In the left Settings menu, go to Preferences > Node Management > Port Scan.
  3. Click the checkbox of the port you want to use, or toggle Usage Status in the Status column.
  4. Click Action Management > Disable.