.. _console: Administration Console ====================== Genian NAC provides two types of management consoles. A command-line console that provides system settings such as basic service configuration and network configuration, and a Web console that provides all other management and policy features. Web Console ----------- The access method of the web console is different according to the deployment type of the policy server. On-Premises ^^^^^^^^^^^ #. Open up **Web Browser** and navigate to the following link #. Copy and paste link below into browser #. Replace **Policy Server Management IP Address:8443** with actual IP address :: https://"Policy Server Management IP Address:8443"/ (e.g. https://192.168.50.10:8443/) Cloud ^^^^^ #. Open up **Web Browser** and navigate to the following link #. Copy and paste link below into browser #. Replace **Cloud Policy Server Name** with actual registered name of Cloud Policy Server :: https://"Cloud Site Name"/ (e.g. https://nac.genians.net/) .. _CLI console: CLI Console ----------- 1. CLI console access through SSH access program ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The CLI (Command Line Interface) console can be accessed through SSH (default port: 22). :: ssh "policy server management IP" -p 22 (e.g. : ssh 192.168.50.10 -p 22) .. note:: | Cloud-managed policy server does not provide SSH command-line console. 2. CLI console access through SSH connection from the web console ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ #. Go to **System** on the top panel. #. Select **System** from the **System** item on the left. #. SSH connection destination IP address right |ssh| Click the icon. #. SSH connection is performed using Username and Password in the pop-up window. .. |ssh| image:: /images/ssh.png Genian NAC by default does not allow for SSH access to the appliance until the Administrator allows for this access by adding IP Address or Network Address/CIDR. See: "Allow Remote Access via SSH" under :doc:`/system/default-settings`