.. _debug-vrrpd:

Setting Up HA Configuration Debug
======================================

You can check the normal status by setting debug for VRRP protocol that provides high availability function of Genian |product_name| device, or find out the cause when a problem occurs.

Configuring remote access for Genian |product_name| device SSH access
--------------------------------------------------------------------------

For SSH access to the Genian |product_name| device, the following security items must be set.

#. Go to **System** on the top panel.
#. Select **System** from the **System** item on the left.
#. Click **Policy Server IP**.
#. Select the **Appliance tab**.
#. In **Security**, enter **Approved SSH Source IP 1**. (IP of the terminal performing SSH connection)
#. Click the **Update** button.

Accessing the CLI console via SSH
----------------------------------------------------

1. CLI console access through SSH access program
''''''''''''''''''''''''''''''''''''''''''''''''''''

The CLI (Command Line Interface) console can be accessed through SSH (default port: 3910).

::

    # ssh "Genian ZTNA device IP" -p 3910
    Example
    # ssh 192.168.50.10 -p 3910

.. note:: | Cloud Policy Server does not provide an SSH CLI console.

2. CLI console access through SSH connection from the web console
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

#. Go to **System** on the top panel.
#. Select **System** from the **System** item on the left.
#. SSH connection destination IP address right |ssh| Click the icon.
#. SSH connection is performed using Username and Password in the pop-up window.

.. |ssh| image:: /images/ssh.png


Setting up debug in the CLI console
------------------------------------------

#. SSH connection is performed using **Username, Password**.
#. Enable global configuration mode through **enable** command.
#. Enter the configuration mode through the **configure terminal** command.
#. Enter the **debug vrrpd all** command to enable debugging.
#. Confirm that debug is enabled by entering the **show configure** command.

.. code::

   debug vrrpd category 0xffffffff
   debug vrrpd field 0x31d