Add Virtual IP to Sensor Interface

Virtual IP addresses may be configured on each sensor to aid in anomaly detection. Virtual IP addresses may be automatically assigned from the pool of unused IP addresses or manually assigned.

Adding Virtual IP Manually - Administrator can manually specify and add virtual IPs

Adding Virtual IP automatically - Unused IP are randomly assigned as virtual IPs by the number of Virtual Honeypot IPs configuration. - If the Administrator change a virtual IP numbers, Genian ZTNA check the existing virtual IPs and assign additional virtual IPs.

Virtual IP Conflict Prevention - Adding Virtual IP Manually : If the IP of the new node and the virtual IP are the same, the virtual IP will be automatically changed to unused IP. - Adding Virtual IP automatically : If the IP of the new node and the virtual IP are the same, the new node will not be registered.

Viewing Virtual IP Addresses

  1. Go to System in top panel.
  2. Go to System > System in the left panel.
  3. Click desired Network Sensor IP.
  4. Click Sensor > IP Address tab.
  5. Assigned Virtual IP addresses will be displayed on Virtual Honeypot IP.

Enable or Disable Automatic Virtual IP Assignment

  1. Go to System in top panel.
  2. Go to System > System in the left panel.
  3. Click desired Network Sensor IP.
  4. Click Sensor > Sensor tab.
  5. Click desired interface name of Virtual IP.
  6. Under Virtual Honeypot IPs , enter the number of Virtual IP Addresses to automatically assign from the unused IP pool. Enter 0 to disable.
  7. Click Update.

Adding Virtual IP Manually

  1. Go to System in top panel.
  2. Go to System > System in the left panel.
  3. Click desired Network Sensor IP.
  4. Click Sensor > IP Address tab.
  5. Click desired interface name for adding Virtual IP.
  6. Click Add button beside of Virtual IP.
  7. Define the Virtual IP, and choose to enable or disable.
  8. Click Update.
  9. If desired, repeat to add additional Virtual IP addresses.

Removing Virtual IP Manually

  1. Go to System in top panel.
  2. Go to System > System in the left panel.
  3. Click desired Network Sensor IP.
  4. Click Sensor > IP Address tab.
  5. Click desired interface name for adding Virtual IP.
  6. Click the Delete text beside of the Virtual IP interface to be removed.
  7. If desired, repeat to remove additional Virtual IP addresses.